Air Dryer(Refrigeration dryer)

1.Air Compressor (Screw air compressor , 50HP,75HP,11KW,37KW) 2.Power : 7.5-355 KW 3.Pressure: 0.4-1.3 Mpa

Air Dryer(Refrigeration dryer) No.LC Series

Specifications:

     

Name	Standard air-cooled refrigerant dryer	High temperature air-cooled refrigerant dryer
	Standard water-cooled refrigerant dryer	High temperature air-cooled refrigerant dryer
Title	LC- A	LC- AC
	LC- W	LC- WC
-	-	-
Rated capacity	Nm3/min	Details refer to technical form
Pressure	Mpa	Rated 0.7Mpa(usage pressure 0.4Mpa--1.0Mpa)
Intake temperature		≤45(High-temperature type≤80)
Environment temperature		≤38(water-cooled≤45)
Pressure dew point		2-10
Freezing medium		R22(R134a environmentally friendly refrigerant medium can be ordered )
Cooling type	-	Air-cooled/water-cooled
The largest cooling water capacity	T/h	Details refer to technical form
Cooling water temperature		≤31
Cooling water pressure	Mpa	0.2Mpa-0.4Mpa
Power supply	-	Details refer to technical form
Air compressor power	Hp	Details refer to technical form
Motor secure grade	-	IP54
Motor insulated grade	-	Fgrade
Control type	-	intelligent control or PLC control
Heat-exchange type	-	Cooling countercurrent heat exchanger, back-temperature design
Evaporator design	-	Direct expansion of aluminum fins row tube (blue-water treatment) + Plate design shell with carbon steel materials (stainless steel can be ordered)
Precooling design	-	Screw steel shell pipe + plate design Shell made of carbon steel (stainless steel can be ordered)
Condensator design	-	Air-cooled: Direct expansion of aluminum fins row tube Water cooled: low brass shell and tube-fin(stainless steel can be ordered)
Drainage system	-	Separation of the sewage and drainage, electronic drainage can be timing automatic drainage
Noise	DB(A)	Details refer to technical form
Interface diameter	-	Details refer to technical form
Installation method	-	The room is no foundation with concrete floor, the around space is not less than 1m.

Features :

refrigeration and air system, , the design parameters have to stay more than 20% margin through accurate calculation by experts; piping adopted seamless galvanized steel tubes, any work pressure from 0.2-5 Mpa; selected stainless steel piping for medicine and food industries, non-corrosive, acid and alkaline resistant; the inside and outside wall of air heat exchanger are made from all corrugated steel pipe, can increase cooling capacity utilization, back-well, not dew; evaporator for water treatment is made from purple steel pipe with thin-walled aluminum fins, excellent flow design for heat transfer efficiency; shutter type air-water separator with the centrifugal effect, and watershed efficiency greater than 98%; various forms (single, set, couplet control, PC boards, frequency conversion, etc.) of the control lines, suitable for different users choose; the important parts are adopted international famous brand, to ensure the use life from three to five years; import the rotor cooling fans, with strong winds, low noise, long-life frequent Commitment; pressure components design, production, testing in accordance with international GB151-99, with certification while leaving factory; Water condenser lower brass-winged, slow water flow, multi-stroke, no special requirements for water quality, long-term use of scaling;Armstrong flame-retardant foam insulation materials, the least cold lost ; compressor protection level is IP54 grade (anti-dust and splatter).

Air Dryer(Refrigeration dryer)